Gas Detectors - Multi Gas Handheld
These handheld multi-gas detectors are available in configurations which can detect and analyze two or more gasses.
Thermo Gastech INNOVA ST
2 Gas LEL/O2
Thermo Electrons basic two-gas detector features an internal pump and datalogging. It can even run on alkaline batteries for shift work (8 hrs. per set).
Features
- One button calibration (72 sec)
- NiCd or Alkaline "D" batteries
- Built in datalogger
- Built in pump & flow sensor
- RF resistant housing
- Easy 3 button control
- Peak, STEL, TWA readings
Specifications
- Operating temperature -4 to 113°F
- 12 hours on NiCd, 24 hr. on Alk. at 68°F
- Capacity 13,000 data sets w/no alarms
- Sample flow 500 mL/min
- Dimensions 10" x 5" x 6"
- UL & CSA Class 1, Groups A, B, C, D
- Weight 5 pounds
Ranges
LEL
- 0 to 100% Vol. in 1% steps
PPM
- 0 to 10,000 in 20 ppm steps
O2
- 0 to 30% Vol. in .1% steps
Thermo Gastech GT-201
2 Gas LEL/O2
The GT series detectors is as reliable as always, with an internal pump and datalogging it makes your gas detection job easier.
Features
- Easy calibration
- NiCd or Alkaline "D" batteries
- Built in datalogger
- Built in pump & flow sensor
- RF resistant housing
- 6 button control
- Peak, STEL, TWA readings
Specifications
- Operating temperature -4 to 113°F
- 12 hr on NiCd, 24 hr on Alk. at 68°F
- Capacity 13,000 data sets w/no alarms
- Sample flow 500 mL/min
- Dimensions 10" x 5" x 6"
- UL & CSA Class 1, Groups A, B, C, D
- Weight 5 pounds
Thermo Gastech INNOVA ST
3 Gas LEL/O2/H2S
Thermo Electrons basic 3-gas detector features an internal pump and datalogging. It can even run on alkaline batteries for shift work (8 hrs. per set).
Features
- One button calibration (72 sec)
- NiCd or Alkaline "D" batteries
- Built in datalogger
- Built in pump & flow sensor
- RF resistant housing
- Easy 3 button control
- Peak, STEL, TWA readings
Specifications
- Operating temperature -4 to 113°F
- 12 hr. on NiCd, 24 hr. on Alk. at 68°F
- Capacity 13,000 data sets w/no alarms
- Sample flow 500 mL/min
- Dimensions 10" x 5" x 6"
- UL & CSA Class 1, Groups A, B, C, D
- Weight 5 pounds
Thermo Gastech GT-302
3 Gas LEL/O2/H2S
Thermo Electrons basic 3-gas detector features an internal pump and datalogging. It can even run on alkaline batteries for shift work (8 hrs. per set).
Features
- Easy calibration
- NiCd or Alkaline "D" batteries
- Built in datalogger
- Built in pump & flow sensor
- RF resistant housing
- 6 button control
- Peak, STEL, TWA readings
Specifications
- Operating temperature -4 to 113°F
- 12 hr. on NiCd, 24 hr. on Alk. at 68°F
- Capacity 13,000 data sets w/no alarms
- Sample flow 500 mL/min
- Dimensions 10" x 5" x 6"
- UL & CSA Class 1, Groups A, B, C, D
- Weight 5 pounds
Thermo Gastech INNOVA ST
3 Gas LEL/O2/CO
Thermo Electrons basic 3-gas detector features an internal pump and datalogging. It can even run on alkaline batteries for shift work (8 hrs. per set).
Features
- One button calibration (72 sec)
- NiCd or Alkaline “D” batteries
- Built in datalogger
- Built in pump & flow sensor
- RF resistant housing
- Easy 3 button control
- Peak, STEL, TWA readings
Specifications
- Operating temperature -4 to 113°F
- 12 hr. on NiCd, 24 hr. on Alk. at 68°F
- Capacity 13,000 data sets w/no alarms
- Sample flow 500 mL/min
- Dimensions 10" x 5" x 6"
- UL & CSA Class 1, Groups A, B, C, D
- Weight 5 pounds
Thermo Gastech GT-303
3 Gas LEL/O2/CO
The GT series detectors is as reliable as always, with an internal pump and datalogging it makes your gas detection job easier.
Features
- Easy calibration
- NiCd or Alkaline “D” batteries
- Built in datalogger
- Built in pump & flow sensor
- RF resistant housing
- 6 button control
- Peak, STEL, TWA readings
Specifications
- Operating temperature -4 to 113°F
- 12 hr. on NiCd, 24 hr. on Alk. at 68°F
- Capacity 13,000 data sets w/no alarms
- Sample flow 500 mL/min
- Dimensions 10" x 5" x 6"
- UL & CSA Class 1, Groups A, B, C, D
- Weight 5 pounds
Thermo Gastech INNOVA ST
4 Gas LEL/O2/H2S/CO
Thermo Electrons 4-gas detector features an internal pump and datalogging. It can even run on alkaline batteries for shift work (8 hrs. per set).
Features
- One button calibration (72 sec)
- NiCd or Alkaline “D” batteries
- Built in datalogger
- Built in pump & flow sensor
- RF resistant housing
- Easy 3 button control
- Peak, STEL, TWA readings
Specifications
- Operating temperature -4 to 113°F
- 12 hr. on NiCd, 24 hr. on Alk. at 68°F
- Capacity 13,000 data sets w/no alarms
- Sample flow 500 mL/min
- Dimensions 10" x 5" x 6"
- UL & CSA Class 1, Groups A, B, C, D
- Weight 5 pounds
Thermo Gastech GT-402
4 Gas LEL/O2/H2S/CO
The GT series detectors is as reliable as always, with an internal pump and datalogging it makes your gas detection job easier.
Features
- Easy calibration
- NiCd or Alkaline “D” batteries
- Built in datalogger
- Built in pump & flow sensor
- RF resistant housing
- 6 button control
- Peak, STEL, TWA readings
Specifications
- Operating temperature -4 to 113°F
- 12 hr. on NiCd, 24 hr. on Alk. at 68°F
- Capacity 13,000 data sets w/no alarms
- Sample flow 500 mL/min
- Dimensions 10" x 5" x 6"
- UL & CSA Class 1, Groups A, B, C, D
- Weight 5 pounds
RKI Eagle
4 Gas LEL/O2/H2S/CO
RKI has made the Eagle with the user in mind; a rugged housing, NiCd or alkaline battery option, datalogging, and auto calibration.
Features
- Auto calibration feature
- NiCd or Alkaline “D” batteries
- Built in datalogger
- Built in pump & flow sensor
- RF resistant housing
- 6 button control
- Peak, STEL, TWA readings
Specifications
- Operating temperature 14 to 104°F
- 18 hr. on NiCd, 30 hr. on Alk. at 68°F
- Continous operation on AC or DC adapter
- Sample flow 2.0 SCFH
- Dimensions 10.5" x 5.9" x 7"
- UL & CSA Class 1, Groups A, B, C, D
- Weight 5 pounds
Ranges
LEL
- 0 to 100% LEL in 1% steps
O2
- 0 to 40% Vol. in 1% steps
H2S
- 0 to 100 ppm in 1 ppm steps
CO
- 0 to 500 ppm in 1 ppm steps
