Oil/Water Interface Meters
These instruments are used for detecting the interface between water and hydrocarbons. Call us with help selecting the best model for your application.
Solinst 122
Oil/Water Interface Meter
The Model 122 probe is only 5/8" 16 mm) in diameter. It can be used in 1" (25 mm) wells. It measures the depth and thickness of non-aqueous product layers (DNAPL & LNAPL) in monitoring wells and tanks.
Features
- Measure product level and thickness
- Infrared refraction sensor
- Marked in feet, 10ths and 100ths
- Alkaline “9V” batteries (2)
- Auto shut off after 10 minutes
- Grounding Clip and Tape Guide
Specifications
- Polyethylene tape
- Stainless steel probe
- Responds to LNAPL and DNAPL
- 120 hour runtime
- Probe Diameter 0.625"
- Weight 7 lbs. (with 100 foot tape)
Ranges
Oil Level
Oil Layer
MMC D-2401 FLEXI-DIP
Oil/Water Interface Meter
The MMC FLEXI-DIP is a convenient and accurate means of measuring ullage and a lower oil-water interface. It is suitable for marine and land-based tank facilities and also for environmental monitoring well applications. The MMC is capable of detecting all floating and non-conductive hydrocarbons.
Features
- Measure product level and thickness
- Dual function Sonic sensor
- Marked in feet, 10ths and 100ths
- Alkaline “9V” battery (1)
- Auto shut off
- Grounding Clip
Specifications
- Tefzel coated tape
- Stainless steel and plastic probe
- 80 hour runtime
- Responds to LNAPL and DNAPL
- Probe Diameter 1.5"
- Weight 9 lbs. (with 100 tape)
Ranges
Oil Level
Oil Layer
Heron H.OIL
Oil/Water Interface Meter
For measuring the thickness of oil layers in groundwater and floating product in observation wells.
Features
- Measure product level and thickness
- Uses well proven optical technology
- Marked in feet, 10ths and 100ths
- Non stretch tape
- Alkaline “9V” battery (1)
- Built in well casing hanger
Specifications
- Accurate to 1/200 foot
- Kynar jacketed tape
- Responds to LNAPL and DNAPL
- 120 hour runtime
- Probe Diameter 0.625"
- Weight 7.5 lbs. (unit w/100 ft. Tape)
Ranges
Oil Level
Oil Layer
ORS
Oil/Water Interface Meter
The ORS Interface Probe accurately measures depth to hydrocarbons and water in monitoring wells and tanks by using an optical prism.
Features
- Measure product level and thickness
- Optical prism/conductivity sensor
- Marked in feet, 10ths and 100ths
- Duracell AA MN1500 batteries (6)
- Auto Sleep mode
- Grounding Clip
Specifications
- Tefzel jacketed tape
- Chemically resistant probe
- 80 hour runtime
- Responds to LANAPL and DNAPL
- Probe Diameter 1"
- Weight 7.8 lbs.
Ranges
Oil Level
Oil Layer
