pH/Conductivity/Temp Meters
Rent your water quality equipment from EQUIPCO and you are guaranteed to get an instrument that has been serviced and tested by a trained technician.
YSI 63
pH/Temp/Cond/Sal Probe
The YSI 63 is a very accurate field instrument for the measurement of pH, Conductivity, Temperature, and Salinity.
Features
- Auto temp. compensation
- Alkaline “AA” batteries (6)
- User set salinity and altitude
- Weighted probe sinks fast
- Large backlit display
Specifications
- Operating temp. 23°C to 113°C
- 100 hour runtime
- 50 data points
- Probe Dimensions 1" Diameter
Horiba U-10
Multiparameter Probe
The Horiba U-10 is a lower cost alternative to the YSI-6820, but does not provide ORP data, and is not designed as a flow through instrument.
Features
- Down-hole or surface readings
- Alkaline “9V” battery (1)
- One button auto-calibration
- Store readings in memory
- Single auto-cal solution
- Displays one parameter
- Auto power-off in 30 min.
- Fits 4" or larger wells
- No flow cell option
Specifications
- Operating temp. 32 to 122°F
- 80 hour runtime
- Max. depth 10 meters
- Log 20 readings of 6 parameters
- Output data to centronics port
- Water resistant display
- Probe Dimensions 3.3"D x 8.9"L
- Display Dimensions 3.6" x 1.8" x 7.5"
- Weight 2.7 lbs. with 2m cable
Ranges
pH
DO mg/L
Conductivity
Temperature
Salinity
Turbidity
Horiba D-24
pH/Cond/Temp Meter
A very well designed and accurate instrument for surface measurements of pH, Conductivity and Temperature.
Features
- Surface readings
- Alkaline “9V” battery (1)
- Easy calibration procedure
- Optional ORP probe
- Comes with cal. standards
- Displays one parameter
- Auto power-off
- Waterproof instrument
Specifications
- Operating temp. 32 to 113°F
- 40 hour runtime
- Maximum depth ~3 feet
- Auto. Temperature compensation
- Auto. 3 point pH calibration
- 2 input channels max.
- Dimensions 3.1" x 1.57" x 7"
- Weight 12.5 oz.
Ranges
pH
Conductivity
Temperature
ORP
Beta Technologies HyDAC
pH/Temp/Cond Meter
The HyDAC has been used for over 10 years by field professionals across the country for basic pH, Temperature, and Conductivity. But be careful... it is not waterproof!
Features
- Digital display
- Alkaline "9V" battery (1)
- Easy calibration procedure
- Comes with cal. standards
Specifications
- Operating temp. 32 to 160°F
- 40 hour runtime
- Weight 8 oz.
Horiba D-21
pH Meter
The Horiba D-21 is the best choice for field measurements of pH/Temperature. Unlike the HyDAC, this meter is waterproof to 1m.
Features
- Surface readings
- Alkaline "9V" battery (1)
- Easy calibration procedure
- Comes with cal. standards
- Auto power-off
- Waterproof instrument
Specifications
- Operating temp. 32 to 113°F
- 40 hour runtime
- Auto. Temperature compensation
- Auto. 3 point pH calibration
- Dimensions 3.1" x 1.57" x 7"
- Weight 12.5 oz.
Search Terms: 63, U-10, U 10, U10, D-24, D 24, D24, HyDAC, D-21, D 21, D21 (for our search engine)
