Multiparameter Meter Rentals

We maintain a large rental inventory of multiparameter water quality instruments for surface measurements and with cables up to 50 feet. These instruments are capable of measuring anywhere from three to six water quality parameters simultaneously.

If you are looking for a YSI 556 for low flow sampling, a water quality sonde, or just an instrument with more parameters try our flow cell rentals or water quality sonde rentals.

YSI Model 85

DO/Conductivity/Temp Meter - 10 or 50 Foot Cable

YSI Model 85
Magnify

The YSI 85 is similiar to the popular YSI 55 DO meter with the addition of conductivity measurements and datalogging. The 85′s large LCD display is capable of displaying dissolved oxygen, conductivity, or salinity and temperature simultaneously. Dissolved oxygen measurements can be viewed in percent saturation or mg/L and are automatically compensated in real time for temperature and conductivity with an additional adjustment for altitude during calibration. All YSI 85 rentals come with either 10 or 50 foot cables, calibrated by our factory certified technicians, and ready for use

Ranges
Dissolved Oxygen
0 to 200% air saturation
0 to 20 mg/L
Resolution 0.1% air saturation
Resolution 0.01 mg/L
Accuracy ±2% air saturation
Accuracy ±0.3 mg/L
Conductivity
0 to 200 mS/cm
Resolution 0.1 µS/cm @ < 499.9 µS/cm
Resolution 1 µS/cm @ < 4999 µS/cm
Resolution 0.01 mS/cm @ < 49.99 mS/cm
Resolution 0.1 mS/cm @ > 49.99 mS/cm
Accuracy ±0.5%
Salinity
0 to 80 ppt
Resolution 0.1 ppt
Accuracy ±2% or ±0.1 ppt
Temperature
23 to 149°F
-5 to 65°C
Resolution 0.1°
Accuracy 0.18°F or 0.1°C
Features
  • Simultaneously measures DO, conductivity, and temperature
  • Displays DO in % air saturation or mg/L
  • Displays specific conductivity, conductivity, or salinity
  • Simultaneously displays temperature along with 1 parameter
  • Datalogging
  • Large backlit LCD display
  • Automatic temperature compensation
  • Automatic salinity compensation
  • Manual altitude compensation during calibration
  • User adjustable temperature and compensation factors for conductivity
  • Automatic or manually selected conductivity ranges
  • Quick and easy calibration
  • Built in probe storage and calibration chamber
  • Stainless steel weighted probe
  • Rugged and water resistant
Specifications
  • Datalogging points 50
  • Input power 6 AA alkaline batteries
  • Runtime 100 hours
  • Operating temperature 23 to 113°F
  • IP rating 65
  • Dimensions 9.5″ x 3.5″ x 2.2″
  • Weight 1.7 lbs
Rent This Model

Configuration
Field Supplies

Every YSI 85 comes calibrated and ready for use.
If you need to perform additional calibrations solutions are available below.

YSI Model 63

pH/Conductivity/Temp Meter - 10, 25, 50, or 100 Foot Cable

YSI Model 63
Magnify

When DO measurements are not required, a YSI 63 rental allows the measurement of pH, conductivity, salinity, and temperature. All of YSI classic handhelds display temperature and one parameter simultaneously. The YSI 63 can display pH, conductivity, temperature compensated conductivity, or salinity. A 3 point calibration and automatic temperature compensation provide accurate pH measurements. Our YSI 63 rentals are available with a 10, 25, 50, or 100 foot cable.

Ranges
pH
0 to 14 pH
Resolution 0.1 pH
Accuracy ±0.1 pH
Conductivity
0 to 200 mS/cm
Resolution 0.1 µS/cm @ < 499.9 µS/cm
Resolution 1 µS/cm @ < 4999 µS/cm
Resolution 0.01 mS/cm @ < 49.99 mS/cm
Resolution 0.1 mS/cm @ > 49.99 mS/cm
Accuracy ±0.5%
Salinity
0 to 80 ppt
Resolution 0.1 ppt
Accuracy ±2% or ±0.1 ppt
Temperature
23 to 167°F
-5 to 75°C
Resolution 0.1°
Accuracy 0.18°F or 0.1°C
Features
  • Simultaneously measures pH, conductivity, and temperature
  • Displays specific conductivity, conductivity, or salinity
  • Simultaneously displays temperature along with 1 parameter
  • Datalogging
  • Large backlit LCD display
  • Automatic temperature compensation
  • User adjustable temperature and compensation factors for conductivity
  • Automatic or manually selected conductivity ranges
  • Quick and easy calibration
  • Built in probe storage chamber
  • Stainless steel weighted probe
  • Rugged and water resistant
Specifications
  • Datalogging points 50
  • Input power 6 AA alkaline batteries
  • Runtime 100 hours
  • Operating temperature 23 to 113°F
  • IP rating 65
  • Dimensions 9.5″ x 3.5″ x 2.2″
  • Weight 1.7 lbs
Rent This Model

Configuration
Field Supplies

Every YSI 63 comes calibrated and ready for use.
If you need to perform additional calibrations solutions are available below.

Horiba D-24

pH/Conductivity/Temp Meter - 3 Foot Cable

Horiba D-24
Magnify

Horiba D Series meters are pocket sized water quality meters that allow for accurate surface measurements in the field or the lab. The D-24 measures pH, conductivity, temperature compensated specific conductivity, and temperature. Built in datalogging allows for the quick storage of readings to be recalled later. Both pH and conductivity readings are automatically temperature compensated for increased accuracy. In addition, an adjustable temperature coefficient allows accurate conductivity readings in various solutions. Every Horiba D-24 rentals comes with the conductivity probe calibrated to your specifications and a 3 point pH calibration.

Ranges
pH
0 to 14 pH
Resolution 0.01 pH
Accuracy ±0.1 pH
Conductivity
0 to 100 mS/cm
Resolution 1µS/cm
Accuracy ±0.5%
Temperature
32 to 212°F
0 to 100°C
Resolution 0.1°
Accuracy ±.18°F or ±0.1°C
Features
  • Simultaneously measures pH, conductivity, and temperature
  • Takes quick surface measurements
  • User adjustable temperature coeffecient
  • Automatic temperature compensation
  • Datalogging
  • LCD display
  • Auto shutoff
  • 3 point pH calibration
  • Built in electrode holder
Specifications
  • Datalogging points 30
  • Input power 9V alkaline battery
  • Runtime 40 hours
  • Operating temperature 32 to 113°F
  • Dimensions 3.1″ x 1.6″ x 7″
  • Weight 12.5 oz
Rent This Model

Field Supplies

Every D-24 comes calibrated and ready for use.
If you need to perform additional calibrations solutions are available below.

Beta Technologies HyDAC

pH/Conductivity/Temp Meter

Beta Technologies HyDAC
Magnify

The Hydac is a very lightweight portable instrument that measures the conductivity, pH, and temperature of water using it’s built in sample cup. A Hydac rental provides an easy and reliable way to quickly measure basic parameters in either the lab or the field. Operating the Hydac is as simple as filling the sample cup, measuring the temperature, adjusting the temperature compensation knob, selecting a conductivity range, measuring the conductivity, and finally measuring the pH. All readings are displayed on an LCD screen.

Ranges
pH
0 to 14 pH
Accuracy ±0.01 pH
Conductivity Range 1
0 to 20 µS/cm
Accuracy ±2%
Conductivity Range 2
0 to 200 µS/cm
Accuracy ±2%
Conductivity Range 3
0 to 2 mS/cm
Accuracy ±2%
Conductivity Range 4
0 to 20 mS/cm
Accuracy ±2%
Temperature
0 to 160°F
2.5 to 70°C
Accuracy ±2°F or ±1°C
Features
  • Measures pH, conductivity, and temperature
  • Measurements are easy to take with included sample cup
  • Adjustable temperature compensation
  • 4 user selectable conductivity ranges
  • LCD display
  • Easy pH zero adjustment
Specifications
  • Input power 9V alkaline battery
  • Runtime 40 hours
  • Weight 8 oz
Rent This Model

Field Supplies

Every HyDAC comes calibrated and ready for use.
If you need to perform additional calibrations solutions are available below.

Search Terms

  • Water Quality
  • Multiparameter Meters
  • Horiba U-10
  • U10
  • U 10
  • YSI Model 85
  • YSI Model 63
  • Horiba D-24
  • Beta Technologies HyDAC

Browse All Rental Categories

107 Categories, 228 Models

Our Most Popular Rental Categories

Browse By Manufacturer

30 Manufacturers, 229 Models

Popular Sales Equipment & Promotions

Field Supplies

Great Prices for Project Supplies

Did you know that Equipco also sells environmental field supplies?

Whether you need calibration standards, tubing, or other supplies like gloves and labels, we stock everything you need to finish the job. Our high quality field supplies, including NIST traceable calibration solutions and gases, come at significant savings over manufacturer brands.

Used Equipment

Great Discounts for Used Equipment

Did you know that Equipco also sells used equipment?

Whenever we have used equipment to sell, whether like-new equipment used only for demonstration or a former rental, well maintained and available for a great price, find what you’re looking for here and check back for updates.

RKI Eagle 2

Multiple Gas Monitor

RKI’s Eagle 2 is an advanced portable gas detector capable of monitoring up to six sensors simultaneously including a PID. 16 different sensors are available providing for hundreds of configuration possibilities.

Landtec GEM5000

Landfill Gas Analyzer

The GEM5000 is the latest in the line of Landtec's GEM landfill gas analyzers. Now lighter, smaller, more accurate, and with an improved user interface, the only instrument you need to take into the field just got even better.

Levelogger Edge

Water Level Datalogger

Advanced and durable, the Levelogger Edge is the latest water level datalogger from Solinst. An all new sensor design manages to achieve excellent accuracy while being more robust then previous models and remaining economical.

RAE MiniRAE 3000

Handheld PID Monitor

RAE Systems PIDs are known worldwide for their incredible reliability, accuracy, and features. The MiniRAE 3000 is the latest flagship model featuring the widest range of any handheld PID available and built in correction factors for over 200 compounds.

MultiRAE Series

Multiple Threat Monitor

The MultiRAE Series of handheld gas detectors includes three models for detection of up to six threats simultaneously. Choose from 25 toxic sensors, 3 PID sensors with a 9.8 eV lamp option, and even a gamma radiation sensor.

Your Rental Cart is Empty
Browse Rental Inventory



I forgot my password…