Grundfos Controllers
Grundfos VFD
Redi-Flo2 Pump Controller
Designed using the latest in variable frequency drive electronics, the Grundfos VFD pump converter allows for precise flow control and optimal operation for RediFlo2 .Be careful, this pump is not designed to be used in other than clear water. Costly damage may occur if it is used to pump sandy or silty water.
Features
- For use with 115 (standard) or 230 Vac
- Output ground fault sensing
- For use with Redi-Flo2/4 pumps
- UL approved
- NEMA 4 enclosure
- Precise flow control with button keypad
Specifications
- Operating temp. 34 to 104°F
- 120 V (standard) or 230 V 1 Phase AC input
- Min. 2.5 kW regulated power required
- 0 to 400 Hz in 5 seconds
- Dimensions 14" x 18.5" x 9"
- Weight 20 lbs.
With Redi-Flo2
Output w/115 V in
- 1.5 kW/400 Hz/220 V/3 PH/5.5 A
Output w/230 V in
- 1.5 kW/400 Hz/220 V/3 PH/5.5 A
Grundfos Model SI/MP1
Redi-Flo2 Pump Controller
The Grundfos SI/MP1 pump controller allows for precise flow control of Redi-flo2 and Redi-Flo4 pumps. Be careful, this pump is not designed to be used in other than clear water. Costly damage may occur if it is used to pump sandy or silty water.
Features
- For use with 115 (standard) or 230 Vac
- Output ground fault sensing
- For use with Redi-Flo2/4 pumps
- UL approved
- NEMA 4 enclosure
- Precise flow control with dial
Specifications
- Operating temp. 34 to 104°F
- 120 V (standard) or 230 V 1 Phase AC input
- Min. 2.5 kW regulated power required
- 0 to 400 Hz in 5 seconds
- Dimensions 18.5" x 14" x 9"
- Weight 20 lbs.
Ranges
Temperature
Accuracy
Grundfos BMI/MP1 & BTI/MP1
Redi-Flo2 Pump Controller
One of the most popular groundwater well sampling pumps ever, the RediFlo2 can operate over a wide range of flow. Be careful, this pump is not designed to be used in other than clear water. Costly damage may occur if it is used to pump sandy or silty water.
Features
- 115 V (BMI/MP1) or 230 V (BTI/MP1)
- For use with Redi-Flo2 pumps
- Precise flow control
With Redi-Flo2
Output w/115 V in
- 1.5 kW/400 Hz/220 V/3 PH/5.5 A
Output w/230 V in
- 1.5 kW/400 Hz/220 V/3 PH/5.5 A
Search Terms: VFD, Model SI/MP1, BMI/MP1 & BTI/MP1 (for our search engine)
