Nextteq Injection Detection Tubes

Gastec Injection Tubes

Magnify

Gastec injection tubes are the least expensive method for measuring high concentrations of Carbon Dioxide or Propane. They do not require a sampling pump and Everything needed is included in the kit. with a cost of only $5.65/test for Carbon Dioxide and $5.74/test for Propane including all required equipment, no other detection system is as economical. Under most conditions injection detection tubes do not require any corrections for temperature or humidity and provide a minimum accuracy of 25% of the reading. Like all Gastec tubes, injection detection tubes feature a direct read printed scale, are intrinsically safe, and ready to use anywhere.

For more available ranges, higher accuracy, and a very large selection of measurable gases, Gastec standard gas detection tubes are also available.

Injection detection tubes work by drawing a 20 ml sample into a syringe and then pushing the sample through the tube over a specified period of time (20 seconds for Carbon Dioxide and 2 minutes for Propane). Included in every kit is a special syringe marked to help push the sample through at the specified rate, a tube tip breaker, and instructions along with enough tubes for 20 tests.

Gastec Injection Detection Kits

Call to Order
1-888-234-5678

• 1 Includes: 2 boxes of detection tubes (20 tubes), tip breaker, syringe, and carrying case

Gastec Injection Detection Tubes

Call to Order
1-888-234-5678

• 1 Includes 10 tubes, requires plastic syringe p/n 611
• 2 Includes 10 tubes, requires plastic syringe p/n 601

Gastec Injection Detection Accessories

Call to Order
1-888-234-5678

• 1 For use with tubes p/n 2HT only
• 2 For use with tubes p/n 100B only