- Part Number/Description
Levelogger Telemetry Device
The Solinst LevelSender is a compact, low-cost cellular telemetry device which can connect to Levelogger series products enabling sampling data to be delivered via email or SMS.
Solinst’s Model 9500 LevelSender is a compact, low-cost cellular telemetry device for use with Levelogger series products. The LevelSender connects to your Levelogger via a Direct Read Cable and enables data to be delivered via email or SMS to your smart device or computer. Battery level and status can be monitored with each report.
Initial setup is accomplished using the LevelSender PC software and a USB connection, or via email through the Home Station (updating LevelSenders at the following scheduled report). A sampling rate is defined along with a report rate for communicating with the “Home Station” along with email and SMS recipients. Each LevelSender includes one data port and up to two devices may be connected using a splitter, allowing for monitoring of both a Levelogger and Barlogger in the same well.
Solinst LevelSender Features
- Fits inside standard 2” well casing
- Wireless cellular communication via email or SMS messaging
- LevelSender and Home Station use dynamic IP
- Database updated with each new report
- View and export data with LevelSender software
- Apply remote updates via email from Home Station
Solinst LevelSender Ordering Instructions
Order 1 LevelSender unit per Levelogger monitoring location and 1 reader cable per Levelogger/Barologger. Each LevelSender connects to a Levelogger and/or a Barologger through the reader cable via a direct read cable(s). If you have a Levelogger and a Barologger in the same well a Y cable splitter, p/n 109700, is required.
A 2" well cap is included with the levelsender, 4 inch adapters are available.
The LevelSender system requires a GSM SIM card with an active data plan per LevelSender and adequate cellular service covering the project area.