Schonstedt MAC-51BX
Pipe, Cable, and Magnetic All Purpose Locating System
Featured Rental
An incredibly versatile and field proven underground locator rental kit, the MAC-51BX can locate or trace almost any ferrous metal, power line, pipe, cable, or line break.
The receiver features three selectable modes, magnetic, low frequency, and high frequency. Magnetic mode is used for locating underground energized power lines or ferrous metals without using the transmitter. In high or low frequency mode the receiver is used in conjuction with the transmitter for line tracing and detecting breaks. The transmitter outputs both the low and high frequencies simultaneously allowing frequencies to be switched on the fly from the receiver.
The transmitter can be hooked up in one of two ways. In inductive mode cables or pipes are energzied without any part of them exposed by simply laying the transmitter on the ground above the pipe or cable. Alternatively, inductive clamps are also included for direct connection. As an option we also have a sonde transmitter available for tracing non metallic pipes.
Ranges
- Maximum depths
- Survey markers up to 9′
- Cast iron pipe up to 10′
- Iron valve and curb boxes up to 10′
- Well casting up to 18′
- Ordinance up to 5′
- Steel drum up to 10′
- Manhole cover up to 10′
- Septic tank handles up to 4′
- Power, telephone, and coax lines up to 12′
- Tracer wire, marker magnet, and metallic pipe up to 12′
- Mole (Sonde transmitter) up to 18′
Features
- All purpose locating system
- Magnetic, low frequency, and high frequency modes
- Optional sonde transmitter for non metallic pipes
- Inductive or conductive transmitter capabilities
- Frequencies can be switched on the fly
- Low frequency will not jump breaks
- High frequency allows tracing beyond breaks
- Transmitter signal detectable for over 4000 ft
- Depth measurement using 45° technique
Specifications
- Input power receiver 2 9V lithium batteries
- Receiver runtime 120 hours
- Input power transmitter 8 C alkaline batteries
- Transmitter runtime 60 hours
- Input power MT-2 mole AAA alkaline battery
- MT-2 runtime 30 hours
- Transmitter high frequency 82.5 kHz
- Transmitter low frequency 571 Hz
- Operating temperature -13 to 140°F
- Receiver length 42.3″
- Weight receiver 2.6 lbs
- Dimensions transmitter 43.5″ x 7″ x 5″
- Weight transmitter 5.5 lbs