- Part Number/Description
Solinst Levelogger 5 App Interface
Bluetooth Mobile App Interface
The Solinst Levelogger App Interface is a lightweight, portable hardware device which enables communication between your Levelogger or AquaVent and an Apple iOS device via Bluetooth wireless technology.
The Solinst Levelogger App Interface is a hardware device which enables communication between your Levelogger and an Apple iOS device via Bluetooth wireless technology. Once a device has been connected using the Levelogger App Interface you can view captured data and program your Levelogger using the Levelogger App on your mobile device.
The Levelogger App Interface is small, lightweight, and powered by four easily replaced 1.5V AA lithium batteries. A power button turns the device on and off and auto-off powers down the device after 10 minutes of inactivity. Activity status is indicated with an LED.
- Install the Solinst Levelogger App from the Apple App Store
- Connect the Levelogger App Interface to your device via your Leveloggers Direct Read Cable or your AquaVent Wellhead Connector Cable
- Enable Bluetooth on your device and pair the Levelogger App Interface
- Launch the Solinst Levelogger App and connect your datalogger
- When finished disconnect the datalogger and App Interface
Compatible devices include the Levelogger Edge, Levelogger Junior Edge, LTC Levelogger Junior, Rainlogger Edge, Barologger Edge, and AquaVent. Some older devices are also supported, including the Levelogger Gold, Levelogger Junior, Barologger Gold, and Rainlogger.
Solinst Levelogger 5 App Interface Ordering Instructions
For direct read levelogger deployments, all that is required is the purchase of an app interface to download data directly while the leveloggers are deployed.
For deployments without direct read cables, a direct read to optical apapter is required to connect the leveloggers to the app interface when they are brought to the surface.