Waterra Pumping Mechanisms
Manual and Automated Pumping Mechanisms
Portable Lever Pump
This manually operated device provides some additional leverage when operating Waterra inertial pumps. Designed for the occasional inertial pump operater, the tubing clamp holds tubing for both standard and high flow footvalves and it attaches to most wells. The handle is adjustable for different stroke lengths and for different well casing diameters. The waterra portable level pump is built to last, easy to use, and only weighs around seven pounds.
Hydrolift II
For frequent inertial pump operators, the Waterra Hydrolift II is an electrically operated assistance device. With a 3/4 horsepower electric motor, this actuater creates a 4 inch stroke with a variable speed up to 200 cycles per minute. The hydrolift II can create enough pumping action to operate an inertial pump up to a maximum depth of 150 feet. It requires a 110 or 220 VAC power supply capable of delivering up to 1000 watts.
PowerPump 2
Waterra’s most powerful pumping actuator, the PowerPump 2 is powered by a 2.5 HP 4 stroke Honda engine. This inertial pump actuator can operate even high flow footvalve systems at their maximum depth. It generates a six inch stroke and weighs around 70 pounds.
Portable Lever Pump
This manually operated device provides some additional leverage when operating Waterra inertial pumps. Designed for the occasional inertial pump operater, the tubing clamp holds tubing for both standard and high flow footvalves and it attaches to most wells. The handle is adjustable for different stroke lengths and for different well casing diameters. The waterra portable level pump is built to last, easy to use, and only weighs around seven pounds.
Hydrolift II
For frequent inertial pump operators, the Waterra Hydrolift II is an electrically operated assistance device. With a 3/4 horsepower electric motor, this actuater creates a 4 inch stroke with a variable speed up to 200 cycles per minute. The hydrolift II can create enough pumping action to operate an inertial pump up to a maximum depth of 150 feet. It requires a 110 or 220 VAC power supply capable of delivering up to 1000 watts.
PowerPump 2
Waterra’s most powerful pumping actuator, the PowerPump 2 is powered by a 2.5 HP 4 stroke Honda engine. This inertial pump actuator can operate even high flow footvalve systems at their maximum depth. It generates a six inch stroke and weighs around 70 pounds.
- Rent this Product
- Save money by renting this product from Equipco