Gastec’s GSP-300FT-2 automatic sampling pump is specifically designed for use with continuous detection tubes. Continuous detection tubes provide an economical means to take time weighted measurements for many common indoor air quality nuisance gases. Since the system uses detector tubes no calibration or special training is required. The GSP-300FT-2 automatic sampling pump makes the job even easier by providing automatic timer functionality with total flow and time displays. The flow rate and sample time are simply set on the pump. After sampling has completed, Gastec continuous detection tubes are just as easy to read as the standard tubes and do not require the use of color charts or anything other then a direct reading from the tube.

The Gastec automatic sampling pump is specifically designed for use with continuous detection tubes.

The high density of the reagents in gas detectors tubes makes long term sampling difficult with most electronic suctions pumps. Gastec’s automatic sampling pump overcomes this issue with powerful yet accurate suction capabilities. Fixed flow management keeps the flow rate within 5% under varying loads. Also the flow rate is automatically temperature corrected to the value for 68°F.

The GSP-300FT-2 is an advanced and highly accurate electronic sampling pump with rugged durability for continued use. The LCD display can show real time flow rate, integrated flow rate, and elapsed sampling time. The automatic stop feature can be set to finish sampling at either a predetermined amount of time or after a set amount of volume. The enclosure is both splash and dustproof, and the pump can operate for up to 10 hours from 2 AA alkaline batteries.

Gastec GSP-300FT-2 Gas Sampling Pump Ordering Instructions

The GSP-300FT-2 comes ready to use including batteries and all necessary adapters. All that is required in addition to the pump is the continuous gas detection tubes for your application.

• Rent a Similar Product
• Save money by renting from Equipco