- Part Number/Description
Solinst Drive Point Profiler
Drive Point Profiler
The Solinst Model 660 Profiler is designed to allow collection of samples from multiple points in a single drive/drilling location, at discrete zones. It allows contaminant vs. depth profiling and detailed plume delineation.
The Solinst Model 660 Profiler is designed for collection of samples from multiple points at discrete zones in a single drive/drilling location. It allows contaminant vs. depth profiling and detailed plume delineation. The Solinst Model 660 is a modified version of the profiling device developed at the University of Waterloo and described in a paper at the 1994 NGWA Outdoor Action Conference. The Model 660 can be installed with a rig that hammers, pushes or vibrates the Profiler into appropriate sands. It uses AW rod, and can be adapted to the custom rod used by some rigs.
The 660 Profiler has a 1.75″ (45 mm) diameter. AW stainless steel tip with one row of screened inlet holes set circumferentially. The inlet holes lead to a single stainless steel, LDPE or Teflon® sample line which attaches to a pump, typically a Peristaltic Pump. For best results the sample flow is passed, in-line, through a Solinst VOA Bottle Filler and Flow-Through Cell ahead of a Peristaltic Pump. By using the Solinst VOA Bottle Filler, the sample is not exposed to the atmosphere during retrieval and loss of volatiles is thus minimized.
Solinst's peristaltic pump is an excellent choice for use with drive point profilers.
660 Drive-Point Profiler Features
- Stainless steel tip
- Allows detailed plume delineation
- Allows contaimant vs. depth profiling
- Stainless Steel, Teflon, or LDPE sample lines
- Capable for sampling in most applications
- Grout tip version available